Payment & Shipping Terms:
|Basket Gap:||0.25-0.5mm||Rotary Speed:||0-900r/min|
|Air Inlet Pressure:||0.69MPa||Air Tool Air Supply:||1.8m3/min|
|Fuel Tank Volume:||60L||Main Motor Power:||55kw|
|Oil Pump Power:||0.55kw||Dimension:||2750*2130*1800mm|
vertical drying range machine
API Oil Based Drilling Vertical Cuttings Dryer For Drilling Slurry Treatment
Vertical cutting dryer is used to do further separation for cuttings to recover valuable drilling fluids, drying solids discharge, cleaning return fluid, reducing mud loss. Cuttings discharged by shale shaker, desander, desilters (or mud cleaner) can be fed into the dryer’s hopper and spaced widely to the inner screens, achieving the drying and separating efficiency.
By recovering the mud in drilling cuttings, the vertical cuttings dryer can reduce the drilling cost and cut down environmental pollution. With handling capacity of 40-60 T/h, the oil on cuttings (OOC) of drilling cuttings can be reduced to lower than 5% (w/w) after treatment, meeting the international emissions standards and environmental protection requirements. The vertical centrifuge can also be applicable for drilling waste management in onshore and offshore drilling.
Our vertical Cuttings Dryer is a vertical type centrifuge has has been proven to be one of the most effective waste management equipment for oil- or synthetic- based drilling operations. The cuttings dryer can effectively clean the drilled cuttings, recover the maximal drilling fluids and reduce the volumes of drilling wastes that has to be transported from well site for disposal. We also offer drilling waste management tank system.
Benefits of TR Drilling Vertical Cutting Dryer
Techncial Data of TR Drilling Vertical Cutting Dryer
|Rotary Speed||900 r/min||0-900 r/min|
|Air knife Air Inlet Pressure||0.69Mpa|
|Air Tool Air Supply||1.8m3/min|
|Fuel Tank Volume||60L|
|Main Motor Power(Kw)||55Kw|
|Oil Pump Power(Kw)||0.55Kw|
TR VFD cuttings dryer control panel is made of stainless steel with Pressurized explosion proof. The PLC smart control allows you to adjust the speed and protect the machine more friendly. The air circulation through the cooling tubes allow you to use the VFD cuttings dryer in high temperature environment. The VFD is ABB or SIEMENS Brand, other main electric components are Schneider or SIENMENS Brand.
1. We offer high quality products at competitive price.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia and many other countries.
Customer's satisfaction is the highest pursuit of TR Solids Control.
Contact Person: Ms. Sunny Lee
Tel: +86 13186019379