Stable Well Control Equipment 35Mpa Working Pressure 103mm Main Diameter

Well Control Equipment Choke Manifold for Oill Drilling Petroleum Equipment

Choke Manifold

Application

Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to the execute new drilling well's technique of balance pressure, which can prevent the pollution oil-layer,improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balance drilling can work under the minimum pressure-difference.

Choke Manifold Control pressure to prevent overflow and blowout. Reduce wellhead casing pressure by relief function of choke valve. Full-bore and two-way metal seal Choke bean features hard alloy inside, delivering high resistance to erosion and corrosion. The relief valve helps to reduce casing pressure and protect BOP. Configuration type: single-wing, double-wing, multiple-wing or riser manifold Control type: manual, hydraulic, RTU Kill Manifold Kill manifold is mainly used to kill well, prevent fire and assist in fire extinction.

Configuration

Choke manifold consists of four manual gate valves (also called diamont choke manifold, five gate valves if a bypass valve is included). It is used to control the flow rate and reduces well pressure before the flow enters the processing equipment. The maniflod also includes a positive choke box, an adjstable choke, and several pressure or sampling ports and thermowells to monitor pressure, temperature, and fluid characteristics.

Working Principle

When the pressure rising in well,fluid in well can be released in utilization of the choke valve opening/closing in choke manifold to control casing pressure, which can directly blow out through gate valve when the casing pressure is quite high.

Operating Instructions of Our Choke Manifold:

1. The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used.
2. The pressure gauge must be installed.
3. In winter, the choke manifold can work under a low temperature condition.
4. The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure.
5. The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough.

Technical Specification of Our Choke Manifold:

Competitive Advantages

1. We offer high quality products at competitive price.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia and many other countries.

Company Tenet

Customer's satisfaction is the highest pursuit of TR Solids Control.