Payment & Shipping Terms:
|Rated Working Pressure:||35Mpa||Specification Level:||PSL3|
|Applicable Standard:||API16C||Lateral Diameter:||65mm|
|Material Grade:||EE||Rated Temperature:||-29°C~121°C|
oilfield spare parts,
drill accessories kit
Petroleum Oil and Gas Drilling Equipment Choke Manifold , API 16C Choke Manifold
Choke and Kill Manifold is used to control well kick and pressure. In case of well kick or blowout, Choke Manifold may control downhole pressure by valves open/close. Heavy slurry may be pumped into well by Kill Manifold to reach pressure balance. Besides, Choke Manifold can be applied to well cleanup and blow-off.
Choke Manifold Control pressure to prevent overflow and blowout. Reduce wellhead casing pressure by relief function of choke valve. Full-bore and two-way metal seal Choke bean features hard alloy inside, delivering high resistance to erosion and corrosion. The relief valve helps to reduce casing pressure and protect BOP.
2. Main Configuration
TR choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components.
3. Working Principles
When the pressure rising in well,fluid in well can be released in utilization of the choke valve opening/closing in choke manifold to control casing pressure, which can directly blow out through gate valve when the casing pressure is quite high.
Pressure classes 5000psi, 10000psi, 15000psi. Can also be designed according to requirement of client.
Choke manifolds are manufactured according to API Spec 16C.
Working Pressure: 5,000psi ~ 15,000psi
Nominal Bore Size : 2 1/16 - 4- 1/16"
5. Operating characteristics of Our Choke Manifold:
Specifications of Our Choke Manifold:
Contact Person: Ms. Sunny Lee
Tel: +86 13186019379